What are the Requirements for a Land Registry plan?
from Greener Consultants
Whether you are selling part of your garden, creating a lease for a commercial unit or converting a building into flats, a clear and accurate plan helps everyone understand what is included in the transaction.
For property in England and Wales, HM Land Registry’s central requirement is that the land can be clearly identified on the Ordnance Survey map. The detail needed depends on the property and the transaction: a straightforward land transfer may need a site plan, while a lease of part of a building may also require floor plans.
What is a Land Registry plan?
“Land Registry plan” commonly describes a plan prepared to accompany a transfer, lease or registration application. It illustrates the property covered by the legal document.
This differs from the title plan produced by HM Land Registry. A title plan shows the general extent of a registered property and must be read alongside its register and any relevant filed documents.
For a leasehold flat, the title plan may show only the building’s outline. The lease and its accompanying plan provide the detail needed to understand which accommodation is included.
What should the plan include?
HM Land Registry’s guidance expects a plan to:
- Be accurately drawn to a stated metric scale, with a bar scale.
- Show orientation, normally using a north arrow.
- Include surrounding roads and landmarks so the property can be located.
- Clearly identify the whole extent using suitable edging, colouring or hatching.
- Include relevant gardens, garages, parking spaces and other separate areas.
- Show any rights referred to in the deed clearly.
- Agree with the written property description.
Its preferred scales include 1:1250 to 1:500 for urban properties and 1:2500 for rural properties. More detailed drawings may be necessary for small or complicated areas. Measurements are useful for undefined boundaries; a total area measurement is not generally required.
What are the requirements for a lease plan?
A lease plan helps define the premises being leased, often called the demised premises. It should be considered together with the lease wording.
A useful starting point is to separate three questions:
- What accommodation or land is included exclusively in the lease?
- What areas can the tenant use through shared or other rights?
- What remains outside the lease?
For example, an office tenant might lease a first-floor suite while having rights to use a communal staircase, entrance lobby and toilets. Showing everything as one undifferentiated area could create confusion about what the tenant actually leases.
Before preparing the drawing, the landlord and solicitor should confirm how these areas are to be treated. The drawing can then use distinct references that match the lease.
Does every lease need to be registered?
New leases granted for more than seven years generally require registration. However, shorter leases can also require registration in particular circumstances, including certain leases that start more than three months after they are granted.
The need for a clear lease plan is therefore not determined solely by the lease term. Even where registration is unnecessary, a plan can help the parties define the premises accurately. Your solicitor should confirm the registration requirements for the particular lease.
When are floor plans required?
Floor plans are needed where the extent cannot be adequately explained by a site plan alone. HM Land Registry’s guidance calls for the extent at each relevant floor level to be clear, using separate plans where necessary, and related to the building footprint or surrounding mapping.
Typical examples include:
| Property or transaction | Detail to consider |
|---|---|
| A flat within a converted house | The flat’s position and extent on the relevant floor |
| A maisonette | The accommodation on each included level and its connecting stairs |
| A shop with a basement | The ground-floor and basement extents, which may differ |
| An office suite within a larger building | The suite boundaries and any separately identified shared access |
| A room above another property’s passageway | The relationship between the upper accommodation and the space below |
These examples show why drawing a line around the whole building is sometimes insufficient. A first-floor flat may extend over a ground-floor entrance belonging to another occupier, while a basement may cover only part of the footprint above.
Floor plans are not automatically needed simply because a house has several storeys. The question is whether the documents clearly identify the property being dealt with.
As a practical drafting approach, agree the included levels first, then check any balconies, private stairs, stores and external areas individually. Avoid assuming that everything used by an occupier is necessarily included in their lease.
What are the requirements for a transfer plan?
A transfer plan is commonly used when part of an existing property is being sold, such as a building plot or a section of garden.
Transfers of part usually need a plan. HM Land Registry allows limited exceptions where the relevant extent is already clearly identified on the existing title plan.
Consider a homeowner selling a strip of garden to a neighbour. Before the plan is drafted, the parties should agree:
- Where the new boundary starts and finishes.
- Whether it follows an existing feature or creates a new line.
- Whether any access or service rights need to be addressed.
- Whether any areas are expressly excluded.
The solicitor can then confirm the legal arrangements, while the plan translates the agreed extent into a clear drawing.
A useful check is to view the proposed transfer from both sides: can the buyer identify what they are acquiring, and can the seller identify what they will retain?
Does a Land Registry plan establish the exact legal boundary?
An ordinary title plan generally shows general boundaries, rather than determining the exact legal boundary line. Preparing a more detailed drawing does not, by itself, change that status.
This distinction matters where the issue concerns the precise position of a fence, ownership of a wall or a disputed strip of land. Those questions may require examination of the deeds and other evidence, or a separate boundary process.
How can you avoid problems with the plan?
Treat the drawing and legal document as a coordinated set. A practical review should check that every colour, label and reference used in one appears correctly in the other.
Also check the final version after printing or scanning. Small labels, faint lines and overlapping colouring can make an otherwise clear drawing difficult to interpret.
Before commissioning a plan, gather the available title documents, existing drawings and your solicitor’s instructions. Flag any changes to the property, uncertain boundaries or differences between the existing documents and the current layout. This helps identify where further information or a measured survey may be useful.
Land Registry plans from Greener Consultants
At Greener Consultants, we prepare Land Registry plans, lease plans and transfer plans, including detailed floor plans for properties with more complex layouts.
Whether you are transferring part of a garden, arranging a commercial lease or defining individual flats within a building, we can help present the property clearly and accurately.
Contact Greener Consultants to discuss your property and the plans required for your transaction.
Based on HM Land Registry’s guidance on preparing plans, title plans and lease registration.







